If you can change a screen, you can install the Easy Peasy Access Screen. We supply the zippered screen, (and spline and spline tool, if you’ve purchased that option).

To install the Easy Peasy Access Screen, follow these steps: 

1. Remove the screen door from the camper.
2. Place the door on a flat surface with the spline (inside of door) facing up.
3. Carefully remove the existing spline.
4. Fold the screen down to the middle of the door.
5. Cut the existing screen along the bottom of the top half of the door and remove it.
6. Center your Easy Peasy Access Screen on the opening, while ensuring the zipper pulls are at the top.
7. While keeping the screen taut and using either the existing or supplied spline, use the convex end of the spline tool to press the spline into the door channel. Start at the top where the twin zipper pulls meet to ensure the screen remains centered. Be careful not to rip the screen. No need to rush.
8. Continue installing the spline around the door frame.
9. Use the concave side of the spline tool to press the spline farther into the channel. Again, be careful not to rip the screen.
10. Cut off any excess spline and screen and re-install the door.

Congratulations! Enjoy your new window on the world.